DAK Resources

Medical Supply Technician

Phoenix, AZ - Full Time

STATEMENT OF WORK
We are looking for 15 Full-Time Equivalent (FTE) Sterile Processing Service (SPS) Technicians (also known as Medical Supply Technicians) to augment current VA staffing on an as-needed basis to the Phoenix Veterans Affairs Healthcare System (PVAHCS) at 650 East Indian School Road Phoenix, AZ 85012. The Sterile Processing Service Technicians shall rotate assignments among the various sterilization, process, decontamination, surgical/ dental tray assembly, flexible endoscope reprocessing, reusable inventory, medical equipment processing, and quality assurance functions. The Service Technicians may be required to workdays, evenings, nights, weekends, and/or holidays.

QUALIFICATION REQUIREMENTS.
  • a) Sterile Processing Services Technician staff must meet one (1) or more of the following requirements.
  1. Certification as a Certified Registered Central Service Technician (CRCST) or higher by the International Association of Healthcare Central Service Material Management (IAHCSMM/HSPA).
  2. Graduation from a nationally recognized CRCST training program with a minimum of 2 current years of documented work in the field.
  3. Graduation from a nationally recognized Operating Room Technician training program with a minimum of 2 current years of documented work experience in a Sterile Processing Service environment.
  4. Graduation from a US military training program for Surgical Technicians with a minimum of 2 current years of documented work experience in a Sterile Processing Service environment.
  5. VA Level 2 certification with a minimum of 2 years of current work experience in the SPS environment.
  6. Non-Certified technicians with documented and verifiable SPS hands-on work experience for a minimum of 5 years.
DUTIES AND RESPONSIBILITIES OF STERILE PROCESSING SERVICE TECHNICIANS.

A) Personnel submitting for consideration must be competent and have a functional level of understanding and ability to apply these knowledge, skills, experience, and qualifications to daily work practices.
  1. Must have practical knowledge of theory, principles, practice, and techniques of asepsis to prevent the spread of infection.
  2. Must have practical knowledge of microbiology and the principles as they apply to surgical supply operations as they relate to the resistance of microorganisms to external destructive agents such as heat, and chemicals used for sterilization and High-Level Disinfection (HLD).
  3. Must have a working knowledge of standard procedures for steam autoclaving including, but not necessarily limited to:
    • (1) Biological testing of sterilization efficacy utilizing commercially available incubated biological test vials.
    • (2) Chemical indicators, internal and external, used for identifying steam sterilization exposure.
    • (3) Use, purpose, and correct interpretation of the Bowie-Dick test.
    • (4) Interpretation and proper recording of results of all sterilization tests.iv) Must have a working knowledge of standard procedures for use of chemical sterilization such as Sterrad, including, but not necessarily limited to:
       
    • (1) Biological testing of sterilization efficacy utilizing commercially available incubated biological test vials.
    • (2) Chemical indicators, internal and external, used for identifying sterilization exposure.
    • (3) Processes for routine operator maintenance, including replenishment of sterilant cartridges.
    • (4) Interpretation and proper recording of results of all sterilization tests.v) Must have a working knowledge of standard procedures for use of HLD systems such as Medivator Advantage, Trophon, and manual HLD utilizing Cidex OPA.(1) Must be aware of and capable of performing on a routine daily basis all testing and quality assurance procedures associated with the use of these devices and chemicals.
  4. Must have a good working knowledge of the availability, economics, use, operation, maintenance, assembly, and disassembly of the full range of surgical supplies, instruments, equipment, and the specific cleaning, sterilizing, and storage requirements of each.
  5. Must possess a very broad knowledge of all types of surgical and clinical instrumentation. This knowledge must include sufficient working knowledge to be able to identify damaged or broken instruments and be able to find a suitable replacement item if available.
  6. Knowledge of surgical specialty instrumentation must include a minimum of the following specialties:
    • Gynecology; including laparoscopic and hysteroscopic instrumentation.
    • General; including laparoscopic instrumentation.
    • Orthopedics; including arthroscopic instrumentation, total joint arthroplasty, fracture fixation, and soft tissue procedures.
    • Microscopic surgical instrument care and handling; for example, eye cataract instrumentation.
  7. Must have a thorough familiarity with surgical procedures performed in a hospital Operating Room.
  8. Must have knowledge of medical and surgical terminology, human anatomy, and physiology.
  9. Must have a thorough knowledge of aseptic principles and techniques including characteristics of various types of detergents, and cleaning techniques.
  10. Must have knowledge of the proper handling, cleaning, and reprocessing for use of flexible endoscopes such as colonoscopes and gastroscopes.
  11. Must be able to follow detailed, step-by-step instructions provided by the manufacturer for the handling, cleaning, and sterilization or HLD processing of a large variety of surgical and clinical Reusable Medical Equipment (RME).
  12. Must be capable of performing all physical demands of the SPS department including but not limited to:
    • Frequent lifting of instrument baskets weighing up to 25 pounds and occasional lifting of objects up to 50 pounds.
    • Prolonged standing, frequently as much as 8 hours per duty day with normal rest and meal breaks.
    • Frequent pushing and pulling of carts weighing several hundred pounds.
    • Frequent and repetitive bending to floor level. Frequent and repetitive lifting above the shoulders, with occasional lifts above the head.
  13. Must be able to read, write, and understand the English language.
  14. Must be capable of working in a loud environment with occasional very loud noises.
  15. Must be capable of wearing required Personal Protective Equipment (PPE) for 8 hours of a duty day with normal rest and meal breaks.
  16. Must be capable of working in a hot and humid environment while wearing PPE.
  17. Must be capable of performing repetitive work for long periods of time.
  18. Must be flexible and able to change tasks at a moment’s notice.
 
WORK SCHEDULE.
a) Sterile Processing Service Technician staff shall work in areas designated by the COR or his/her designated representative.
b) Sterile Processing Service Technicians weekly hours can range from eight (8) to forty (40) hours per week.
 
c) Sterile Processing Service Technicians shall be available Monday-Sunday with five possible Tour of Duties:
  • Tour 1 – 6:00am – 2:30pm
  • Tour 2 – 8:00am – 4:30pm
  • Tour 3 – 2:30pm – 11:00pm
  • Tour 4 – 3:30pm – 12:00am
  • Tour 5 – 9:00pm – 5:30am
 
d) Sterile Processing Service Technicians may rotate shifts as needed.
e) There is no work in excess of 8 hours permitted.
    Compensation for this position is set at $27.58 an hour. 
f) Sterile Processing Service Technician staff that works a six (6) hour, or longer, shift shall be entitled to an unpaid thirty (30) minute meal break.
g) The Government reserves the right to schedule or reschedule duty hours to meet staffing and patient care needs. The Government shall provide a twenty-four (24) hour notice of any schedule changes. 
h) Sterile Processing Service Technician staff shall be present at the facility and shall be performing the required services to receive payment for services. The Sterile Processing Service Technician staff shall only receive payment for the actual number of hours worked on-site.
 
#ZR
Apply: Medical Supply Technician
* Required fields
First name*
Last name*
Email address*
Location
Phone number*
Resume*

Attach resume or Paste resume

Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or paste resume

Paste your resume here or attach resume file

The following questions are entirely optional.
To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Gender
Race/Ethnicity
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status
I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE
I AM NOT A PROTECTED VETERAN
I DON’T WISH TO ANSWER
Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:
YES, I HAVE A DISABILITY, OR HAVE HAD ONE IN THE PAST
NO, I DO NOT HAVE A DISABILITY AND HAVE NOT HAD ONE IN THE PAST
I DO NOT WANT TO ANSWER

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Name Date
Human Check*